NinjaPrompter

How does a teleprompter work?

By , Founder ·

A teleprompter works by showing your script on a screen that you read as a reflection in a sheet of angled glass in front of the camera lens. The camera films you through the glass, so you read while you face the lens, and the viewer doesn't see the script. A phone app can do the screen's job, either under the glass or right next to the lens. These points apply to any teleprompter:

  • The glass reflects part of the screen's light toward you and lets the light from you pass through to the camera.
  • The screen shows the text mirrored, because a reflection reverses left and right. The reflection may also be turned, depending on how the screen sits under the glass.
  • Either you or an assistant operator can set how fast the text scrolls. Some teleprompters even allow to control playback with your voice.
  • Without glass, a phone placed right next to the lens also works. The text doesn't get mirrored in that case.

NinjaPrompter, a teleprompter for iPhone, shows the script on the phone and doesn't record, so you film with a separate camera. The sections below explain the glass and the scroll first, and then how the app works under glass and next to the lens.

How teleprompter glass works (and why the camera doesn't see the script)

In a teleprompter mounted on a camera, the screen lies face up below a sheet of glass set at about 45 degrees in front of the lens, and the camera sits behind the glass (Even Realities). Teleprompter glass is a beam splitter, which means it reflects part of the light that reaches it and lets the rest pass through. It lets most of the light from your side through to the camera and reflects a smaller share of the screen's light to you, and what teleprompter glass is gives the common split and explains why ordinary glass shows the text twice.

You see the script in the glass right in front of the lens, so reading it means facing the camera. The glass reflects the script toward you, not into the lens, so the camera films you through the glass and the script doesn't show in the picture. A hood around the lens and the back of the glass keeps stray light out of the lens.

The same idea works at a conference, where the glass sits on a stand in front of the speaker, with the screen at its base facing up, and the audience sees what looks like a plain pane of glass.

Why the screen shows the text flipped (and when it also needs turning)

A reflection reverses left and right, so the screen shows the text mirrored, which means flipped left to right, and the glass turns it back into text that reads correctly.

Depending on which way the screen lies under the glass, the mirrored lines can still come out upside down or sideways. In that case the text also needs turning, in quarter turns, and which turn depends on how the rig is built.

How teleprompter text scrolls and who sets the speed

The text scrolls at a steady speed, and someone has to choose that speed. An operator can watch you and slow down, stop, or speed up the text with a controller, and some teleprompters follow your voice instead. When you read on your own, you set the speed yourself, and since nobody slows the text down when you stumble, set it a little below your pace.

How a teleprompter app works on a phone

An app uses the phone's screen as the teleprompter's screen and scrolls the text for you. NinjaPrompter doesn't use the camera or the microphone, so it doesn't follow your voice, and the speed is yours to set. Here's what you do with it:

  • Bring in the script. Import a Google Doc or a .txt or .md file. The prompter reads a copy, so your original stays as it is.
  • Set the speed by ear. Scroll speed runs from 10 to 100 points per second (pt/s), not in words per minute, and set the scroll speed to your pace has the method. You can change it during a take.
  • Stop when you need to. Press Pause, or drag the text, and then press Resume to carry on.

You can also plan where the text stops and where it slows down or speeds up. Type a pause mark into the script, such as / for a short pause and // for a longer one, or [slower] and [faster] to change the pace, and how to use pauses in a speech covers where the pauses go. Showing the marks in your script is free. Performance mode, which holds the text at the pauses and changes the pace, is part of the 7-day trial and the subscription. It's off by default, and the holds and pace changes work while the script scrolls on its own.

Use the phone under teleprompter glass (with Mirror text and Rotate text)

Under glass, the phone lies below the glass and you read its reflection, so the script needs the flip and sometimes the turn described above, and you set both yourself in the app. Mirror text flips the script left to right, and Rotate text turns it clockwise in quarter turns, for when the lines come out sideways or upside down. Both are under Mirroring (the flip icon) in the prompter, and how to mirror the script has the steps. Mirroring stays free after the 7-day trial.

Which Rotate text setting you need depends on how the phone lies in your rig, so check the script in the glass from where you'll sit. Turn the phone's brightness up as well, because the glass sends only part of the screen's light to you. To put the glass, the phone, and the camera together, read how to build an iPhone teleprompter.

Use the phone as a teleprompter without glass

Without glass, you read the phone's screen directly, so there's no reflection to correct, and you leave Mirror text off. Put the phone as close to the lens as you can, at eye level, so your eyes rest just off the lens while you read. Set up a phone as a teleprompter has the distance and the text settings that go with it. How to use your phone as a teleprompter shows where the phone goes with a webcam, a vlog camera or a DJI Osmo Pocket.

Whichever setup you use, check it from where you'll sit with the teleprompter test script, which has long and short lines to try.