DIY teleprompter for iPhone: build a rig with glass
To make a DIY teleprompter for iPhone, place the iPhone in a tray below a sheet of teleprompter glass set at 45 degrees in front of a separate camera, and turn on mirrored text. You read the script as a reflection in the glass, and the camera films you through it, so you look into the lens while you read. The steps for building the frame and the tray are below. You can also skip the build and buy a kit that holds the iPhone. If you'd rather not use glass at all, you can put the iPhone right next to the lens, for example on a phone mount beside a vlog camera. These steps work with any teleprompter app that can mirror its text:
- Use teleprompter glass, not ordinary glass.
- Film with a separate camera set behind the glass.
- Turn on mirrored text, and change the rotation if the script reads upside down or sideways in the glass.
- Keep the space behind the glass dark, and turn the iPhone's brightness up.
- Choose portrait or landscape before you start the script, and test the rig from where you'll sit.
- Without glass, put the iPhone as close to the lens as you can, with mirrored text off.
NinjaPrompter, a teleprompter for iPhone, has a mirror mode for teleprompter glass, and the sections below name its settings. It doesn't record, so you film with a separate camera. How a teleprompter works explains why the glass needs mirrored text, and this guide covers building the rig and setting up the iPhone.
What you need for the rig (and why the camera is a second device)
Here are the parts of the rig, besides the script:
- An iPhone with a teleprompter app that can mirror its text. Mirroring in NinjaPrompter is free, during the 7-day trial and after it.
- A separate camera. The iPhone lies face up under the glass showing the script, so the camera has to be a second device. A second iPhone with the Camera app or Blackmagic Camera, a mirrorless camera, a webcam or a vlog camera all work, as long as the lens can sit right behind the glass. If you use an iPhone as your Mac's webcam with Continuity Camera, it can't be the iPhone that shows the script, because the webcam iPhone stays locked while it films.
- Teleprompter glass. Ordinary glass shows the text twice, so use a sheet made for teleprompters. You can buy it on its own as beam-splitter glass, or get it as part of a kit.
- A frame and a tray. Anything rigid works, such as wood, PVC pipe or foam board, as long as it holds the glass steady at 45 degrees above the iPhone.
- A black cloth. You'll use it to darken the space behind the glass.
Buy a phone teleprompter kit instead (if you'd rather not build the frame)
A phone teleprompter kit gives you the glass, a hood and a holder for the iPhone in one piece. It mounts on a tripod or on the camera. Kits such as the Glide Gear TMP 50 and the larger TMP 100 work with any teleprompter app that can mirror its text. Before you buy a kit, keep these points in mind:
- Your iPhone fits. Check the largest phone the holder takes. Also check whether it holds the iPhone in portrait, in landscape or both.
- It fits your camera. Kits that mount on the lens come with adapter rings. Check that one of them matches your lens.
- Its remote won't control NinjaPrompter. Many kits come with their own app and a Bluetooth remote. NinjaPrompter doesn't work with a remote, so you start the script on the iPhone.
With a kit, you can skip the build steps below and go straight to setting up the iPhone.
Build the frame so the glass sits in front of the lens
- Make the tray. Fix a flat tray with a low lip to the base of the frame, so the iPhone lies below the glass and can't slide. Leave one side open, because you'll still press the iPhone's controls by hand.
- Fix the glass. Set the glass at 45 degrees above the tray, tilted so the screen's reflection faces your seat. From your seat, check that you can see the whole screen in the glass.
- Place the camera. Put the camera on a tripod behind the glass, with the lens close to the glass and centered on the screen's reflection, so the script appears right in front of the lens. If the edge of the glass shows in the shot, move the camera closer to the glass or zoom in a little.
- Darken the space behind the glass. Drape the black cloth around the camera and the back of the glass. Because the glass is see-through, anything bright behind it shows through and makes the script harder to read.
- Light your face from the front. Keep the light from shining straight onto the glass, where it adds glare.
Set up the iPhone for the glass (mirrored text, rotation and brightness)
- Import the script from a Google Doc or a .txt or .md file, and open it in the prompter.
- Tap Mirroring (the flip icon) in the top bar, next to Reading settings. The script pauses, and the mirroring controls open.
- Turn on Mirror text.
- Look at the script in the glass. If it reads upside down or sideways, change Rotate text, which turns the script clockwise in quarter turns (0°, 90°, 180° or 270°), until it reads the right way.
- Turn the iPhone's brightness up in Control Center, because the glass reflects only part of the screen's light toward you.
Only the script, the reading guide and the countdown are mirrored and rotated, so you can still read Play and the other controls on the iPhone itself. If you use an app that can't mirror its text, the mirror text tool makes a mirrored PDF you can open on the iPhone.
Choose portrait or landscape for the iPhone (and set it before you press Play)
NinjaPrompter works in portrait and in both landscape orientations. Which one suits your rig depends mostly on the shape of your glass. Tall, narrow glass suits the iPhone in portrait, and wide, short glass suits it in landscape, with a tray to match.
In portrait, the lines are short, so your eyes make small moves as you read. In landscape, on the other hand, each line is a little wider, so your eyes travel farther across it, and the camera can pick that up. If you notice it in a test clip, decrease Column width, in the same section of Reading settings as Font size, to shorten the lines. In landscape, the playback controls also sit beside the script instead of below it, so leave that side of the tray open.
Turn the iPhone to portrait or landscape before you press Play. An iPhone lying flat normally keeps the orientation it had when you laid it down, so turn it while you hold it up, then lay it in the tray. If the prompter stays in portrait when you turn the iPhone, turn off Portrait Orientation Lock in Control Center. While the countdown runs and the script scrolls, the prompter keeps its orientation, so a bump to the rig doesn't turn the script. When you pause, it turns with the iPhone again.
After you change the orientation, look at the script in the glass once more, because Rotate text may need another value.
Use the iPhone without glass (your eyes rest a little off the lens)
You can skip the glass and still read from the iPhone. Mount it on the camera's tripod or on a bracket, as close to the lens as you can and at lens height. Turn Mirror text off or tap Reset, because there's no reflection to correct. Mirroring stays on for every script until you turn it off, even after you close the app.
With a vlog camera such as the DJI Osmo Pocket 4, a phone mount holds the iPhone right beside the camera, with the screen facing you. The Ulanzi PM01 and the Neewer PA160 are made for the Osmo Pocket. On a mirrorless camera, a cold-shoe phone mount such as the Ulanzi MA07 does the same job.
The camera sees where your eyes rest, however, so with the iPhone a few centimeters from the lens, your eyes sit a little off it all through the take. Setting up a phone as a teleprompter shows how far back to sit and how to set the text to make that less noticeable. Looking at the camera during long pauses covers when to look into the lens, and where to put the reading guide when the camera sits above the iPhone. How to use your phone as a teleprompter gives the angle between the lens and the text for each distance, and how far off the lens viewers notice it.
Test the rig from where you'll sit (before you record)
- Put the camera, the glass and the iPhone where they'll be on the day.
- Open your script in the prompter. From your seat, raise Font size until you can read a whole line without leaning in. If you'd like a script with long and short lines to try, use the teleprompter test script.
- Press Play on the iPhone. NinjaPrompter doesn't work with a remote, so the Countdown gives you time to sit back. It runs for 3 seconds unless you change it to 5 seconds or Off in Reading settings.
- Film a short clip, and check it for glare, a double image, the edge of the glass, and where your eyes rest. A double image usually means the glass is ordinary glass.
Once the rig works, how to format a script for a teleprompter shows how to lay out the text so each line is easy to take in. If you're filming a podcast episode, the podcast script template for a teleprompter gives you a script to start from.
How NinjaPrompter helps (and what it doesn't do)
- The screen stays on. It doesn't dim or lock while the prompter is open, so you don't have to touch the iPhone to wake it during a take.
- It can hold at your pauses. In Performance mode, the prompter holds the text for a moment at the pause marks you type, such as
//, and changes the pace at[slower]and[faster], without you touching the iPhone. Performance mode is part of the 7-day trial and the subscription, and showing the marks is free. How to use pauses in a speech covers where to put them. - It doesn't listen. NinjaPrompter doesn't use the microphone, so it doesn't follow your voice. You set the Scroll speed yourself, and you can change it during a take. Setting the speed when nobody operates the teleprompter shows how to find yours.
- It doesn't use the camera. It doesn't move the script toward the lens or correct eye contact, so where your eyes rest depends on where you put the glass or the iPhone.