NinjaPrompter

How to read a script without sounding like you're reading

By , Founder ·

A script sounds unnatural when you deliver it at constant speed, never stop, and keep your eyes on the text. To help it sound spoken, write the stops and the speed changes into the script, then look at the camera during long pauses. These steps work in any teleprompter:

  • Write sentences the way you'd normally say them out loud.
  • Mark pauses where you'd typically breathe or stress a point.
  • Mark where to slow down and where to speed up.
  • Keep eye contact with the camera during long pauses.
  • Set the scroll speed to your natural pace, and rehearse with the cue marks in.

What a mark does depends on the prompter. NinjaPrompter, a teleprompter for iPhone, can hold the pauses and change the pace in its Performance mode. The steps below say what it does with each mark, and a list near the end explains the limits of this method.

Why teleprompter scripts sound unnatural

Three habits make a script sound awkward, and a fourth makes the use of a teleprompter obvious.

  • One speed. When people talk, they naturally speed up through the easy parts and slow down at important points. When reading from a screen, however, many of us tend to be more monotonous and keep roughly the same pace from beginning to end.
  • No stops. Normally, speakers have to stop to breathe and to think, and listeners tend to expect those brief pauses. A reader, on the other hand, has the next words in view, so the natural stops disappear.
  • Sentences written for the page. Long sentences with stacked clauses are made for silent reading. Said aloud, they come out in a voice you don't use when you talk.
  • Eyes on the text. The audience sees you reading line by line, instead of seeing you address them when talking.

Write it to be said

Start with the words. If you wouldn't say a sentence to a friend, rewrite it. Keep sentences short, write numbers and names the way you say them, and keep notes to yourself apart from the words you speak. How to format a script for a teleprompter covers each of these with examples.

Fix the wording before you add cue marks. Adding cue marks to a stiff sentence won't make it sound spoken or natural.

Write the pauses in, and let the scroll hold them automatically

Type a pause mark where you want the stop, and let the prompter hold the text there. On paper, you have to remember to pause. In a prompter that keeps scrolling, the text moves on while you pause, and you come back to words that have already gone past. A pause that's written in and held solves both.

NinjaPrompter's Performance mode helps you maintain natural pace: you can use / and [beat] to instruct the teleprompter to hold the text for half a second, and // and [pause] hold it for one second. You can't change how long a hold lasts, but you can swap a long mark for a short one.

Here are some tips on where to place natural pauses:

  • After an important line. Use //. A full second might feel long while you wait through it, but that's exactly what helps the audience to appreciate the weight of your words.
  • Before a turn. Use // ahead of "but", "so", or "here's the problem".
  • Where you'd breathe. Use /, at the end of a phrase.
  • Where you'd say "um". Use /. A silence you chose sounds like thinking. An "um" sounds like searching for words. It affects your perceived authority as a speaker and makes you less trustworthy.

Type the mark at the end of the line it follows, after a space. The hold starts when the mark reaches the reading guide, so the text stops right after the line you've just said.

Don't mark every line. A hold after each sentence once again creates an even rhythm, and that's exactly what we want to avoid. How to use pauses in a speech covers more places for a pause, such as after a question or between sections.

Change pace on purpose

Slow down when delivering important lines, and speed up through sentences that require a faster pace. In Performance mode, [slower] scrolls at 75% of your Scroll speed, and [faster] at 125%. The change starts when the tag reaches the reading guide and lasts until the end of the paragraph, which is the text up to the next line break. Put the tag at the start of the line, and your speed returns after that line.

Note when using Markdown scripts with NinjaPrompter: .md files join lines that have no blank line between them, so a tag there lasts through every joined line. To keep a line break, see which line breaks a .md file keeps.

Use [slower] for the number, the ask, or the answer, and [faster] for a list or a setup sentence. The tag changes how fast the text moves, and you match it with your voice.

Look at the camera during long pauses

In Performance mode, make sure to look at the camera when the text stops at a //. The hold lasts a full second, and a paused line is easy to look away from and find again. Meanwhile, a short pause / only gives you time to catch a breath, but it's too short to look at the camera, so stay on the text through it.

When a // hold begins, take in the next line, lift your eyes to the lens, and say it. Then return your gaze to the text. Look at the lens for one phrase at a time: a constant stare at the lens looks too intense, too stiff. If Show reading guide is on, the guide thickens into a band during a hold, so you can see the stop without reading.

Guide position, in Reading settings, moves the reading guide up or down the screen. If the camera sits above the phone, move the guide toward the top, so the line you're reading is closer to the lens.

With teleprompter glass, the script sits in front of the lens, so reading the script already means looking into the lens. In NinjaPrompter, turn on Mirror text so the script reads the right way around in the glass. To set up glass for your iPhone, see the DIY iPhone teleprompter guide.

Without glass, put the phone as close to the lens as you can. On a rig that holds the phone right next to the camera, for example one that mounts on a gimbal, reading from the screen looks almost the same as looking into the lens. How to use your phone as a teleprompter shows where the phone goes with each kind of camera.

If your eyes still move a lot between the pauses, how to read a teleprompter naturally shows how to set up the phone and the text.

Set the scroll speed to your pace

The text has to move at the speed you speak. If it runs ahead, you rush to keep up. If it lags, you wait for it. Both will sound unnatural.

NinjaPrompter sets its Scroll speed not in words per minute but in points per second, shown as pt/s, so set it by ear. Start slow, press Play, and say the script aloud. Raise Scroll speed until the line you're saying stays on the reading guide. You can change it during a take, on the slider below the Play button. A speed that's a little slow lets you look at the camera and still find your place, while one that's too fast makes you chase the text. Your words per minute still matter when you write the script, because they tell you how many words fit your time, as public speaking pace explains.

Leave room for the tags. [slower] and [faster] scale the speed you chose, so pick one where 125% is still comfortable and 75% isn't a crawl.

Rehearse with cue marks

Rehearse in the setup you'll record in, with the cue marks set up:

  1. Read the script aloud without the prompter, and rewrite what you stumble on.
  2. Add the marks: pauses after the lines that matter, before turns, and where you breathed, plus [slower] or [faster] on one or two lines. Type them in your Google Doc or text file before you import it, or in the app's script editor.
  3. Put the phone where it will sit when you record, set a low Scroll speed, press Play, and say it aloud without touching the text.
  4. Move the marks that land wrong. If a hold arrives mid-sentence, move its mark to the end of the line. If it feels too long, change // to /.
  5. Run it once or twice more, then stop. You want to know where the stops are, not every word by heart. Past that point, the script starts to sound recited.

A marked sample: a short video intro

Here's a video intro without marks. Read it aloud at one steady speed.

Hi, I'm Sam.
This tap dripped all winter, and I put off fixing it for three months.
Then the water bill arrived.

Today I'll show you how to replace a washer in ten minutes.
With one tool you already own.

You don't need a plumber. You don't need to shut off the whole house, either.

Let's start with the one thing that matters.
Turn off the small valve under the sink.
Then open the tap and let the pipe drain.

Now the same words with marks. Read it again, taking each stop and speed change as marked.

Hi, I'm Sam. /
This tap dripped all winter, and I put off fixing it for three months. //
Then the water bill arrived.

Today I'll show you how to replace a washer in ten minutes. /
With one tool you already own.

[faster] You don't need a plumber. You don't need to shut off the whole house, either.

Let's start with the one thing that matters. //
[slower] Turn off the small valve under the sink.
Then open the tap and let the pipe drain.

At 150 words per minute, its 80 words and marks run about 35 seconds, 3 of them in holds. The / marks are breaths, so stay on the text through them. Look at the camera during the two // holds: after "three months" and before the turn into the task. At each one, take in the next line, then say it to the lens. [faster] speeds the text through the reassurance, and [slower] gives more time to the instruction that matters. For a longer script with the marks already placed, copy the podcast script template for a teleprompter.

To time your own script, take the speaking speed test. Its result opens the speech length calculator at your pace, and the calculator counts your marks too.

For more scripts to practice with, see sample teleprompter scripts.

How NinjaPrompter helps (and what it doesn't do)

  • Holds and pace tags need Performance mode. It's off by default, and it's part of the 7-day trial and the subscription. Turn it on under Delivery cues in Reading settings, or from the Delivery cues button in the prompter. Showing the marks is free.
  • The marks act while the script scrolls on its own. If you drag the text, the script pauses, and the marks do nothing until you press Resume.
  • It doesn't listen. NinjaPrompter doesn't use the microphone, so it doesn't follow your voice. You set the speed, and the marks set the stops.
  • It doesn't record. It doesn't record video or audio, and it doesn't use the camera, so it doesn't correct eye contact. Use it beside a separate camera or recording device. How a teleprompter works shows where the camera goes. Where you look is up to you.

On paper, or in another prompter

You can still make full use of cue marks in teleprompters that don't support them, or even when reading from paper. After all, the marks are reminders for you. Keep / for a breath and // for a stop, and treat each // as your cue to look at the camera and stay quiet for a second. On paper, keep the same slashes. If your prompter keeps scrolling through your pause, set its speed a notch below your pace, so you don't lose your place when you look back. If you'll read a speech from paper, is it OK to read a speech? covers when reading is a good choice and how to print the script so you keep your place.