NinjaPrompter

Podcast script template for a teleprompter, with pause marks

By , Founder ·

A podcast script template has an intro, two to four segments with a transition between them, a recap, and an outro with a call-to-action. To make your own readable script, write each part as short lines in the words you'd say, with a / where you'd take a breath and a // where you want a longer pause. The template in this post follows that order, and I've added example pacing marks for your convenience. These steps work wherever you read your script:

  • Write each part the way you'd naturally say it, one phrase to a line.
  • Put a / where you'd take a breath, and a // after a point you want the listener to remember.
  • Keep sound cues and other notes to yourself in square brackets, on lines of their own.
  • Save the template as a Google Doc or a .md file, so you keep its headings when you import it to your phone.
  • Read it aloud once, and edit any marks if they happen to be in the wrong place.

NinjaPrompter was specifically designed to show these marks and to make reading off a teleprompter sound more natural. The app doesn't record audio, so you keep using your own recorder. The marks are plain text, and the template also works on paper or in another prompter.

A podcast script template to copy and edit

This one is for a solo episode. Replace each capitalized line with your own words, and keep each idea on a dedicated separate line. The lines that start with # are headings, which are labels for you and you're not supposed to read them out loud. For a short video rather than an episode, use the template for your own teleprompter script instead, which goes from a hook to the main point, the proof, and the ask.

# EPISODE TITLE

## Intro

[Music in, then under.]

YOUR HOOK, IN ONE OR TWO SHORT SENTENCES. //

Welcome to SHOW NAME. /

I'm YOUR NAME, and in this episode WHAT IT COVERS, IN ONE SENTENCE. //

[slower] WHAT THE LISTENER WILL TAKE AWAY, IN ONE SENTENCE.

## Segment 1

YOUR POINT, IN ONE SHORT SENTENCE. /

YOUR EXAMPLE, STORY, OR NUMBER, ONE IDEA PER LINE. /

ONE MORE LINE OF DETAIL. //

TRANSITION TO THE NEXT SEGMENT, IN ONE SENTENCE. /

## Segment 2

YOUR POINT, IN ONE SHORT SENTENCE. /

YOUR EXAMPLE, STORY, OR NUMBER, ONE IDEA PER LINE. /

ONE MORE LINE OF DETAIL. //

TRANSITION TO THE NEXT SEGMENT OR THE RECAP, IN ONE SENTENCE. /

## Recap

[faster] YOUR RECAP OF THE SEGMENTS, IN ONE OR TWO SENTENCES.

[slower] THE IDEA YOU WANT THE LISTENER TO REMEMBER. //

## Outro

THE ONE THING YOU WANT THE LISTENER TO DO NEXT. //

WHAT'S IN THE NEXT EPISODE, IN ONE SENTENCE. /

Thanks for listening. //

[Music up.]

For a third or fourth segment, copy a segment and change its number. Keep the blank lines too, because a .md file joins lines that have no blank line between them, and a [slower] tag would then last through all of them. [Music in, then under.] and [Music up.] are notes to you, so you don't say them.

The template uses / for a breath, such as after the welcome, and // for a longer stop, such as after the hook and after the last detail of each segment. [slower] goes on a line you want the listener to take in, such as what the episode offers, and [faster] goes on a recap of what they've already heard. How to use pauses in a speech covers the kinds of pause and where each one goes.

Add a guest introduction and questions for an interview episode

For an interview, put a guest introduction after the intro, and replace the segments with one heading for each question. Script your own lines and leave the answers out, because you can't write what your guest will say.

## Guest introduction

Today my guest is GUEST NAME, WHO THEY ARE IN ONE SENTENCE. /

[slower] WHY THEY ARE HERE, IN ONE SENTENCE. //

Welcome, GUEST NAME. //

## Question 1

YOUR QUESTION, WRITTEN THE WAY YOU'D ASK IT OUT LOUD. //

## Question 2

YOUR NEXT QUESTION, WRITTEN THE WAY YOU'D ASK IT OUT LOUD. //

The text keeps scrolling while your guest answers, so in NinjaPrompter, press Pause after you ask a question, and press Resume when you're ready to read again. Resume starts the text at once, with no countdown.

How to write a podcast script (instead of an essay)

Start with the segments rather than the intro. Pick two to four ideas for the episode, one for each segment, because a few clear ideas are easier to follow than many. Then write each segment the way you'd explain it to a friend, with contractions, short sentences, and one phrase to a line. Write for the ear has the rules and examples.

It's best to write the intro and the outro last, once you know what the episode says. After all, the hook should promise what the segments deliver, and the outro should ask for one thing, such as a subscription or a review. If part of the episode works better as a conversation, you don't have to script all of it. Write out the intro, the transitions, and the outro, which is where people tend to ramble, and speak from bullet points in between. When notes work better than reading helps you choose for each part.

To fit specific parts into a pre-defined recording length, multiply the minutes by your pace. At 150 words per minute, a 10-minute episode is about 1,500 words, and our speech length calculator tool can help you estimate the recording duration of your script. If you don't know your average speaking speed, use the speaking speed test to find it. Note that every natural pause you take lowers your average, as public speaking pace explains.

When the script is done, paste it into the speech length calculator to estimate how long it runs at your pace, with your pause marks included. It skips the notes in square brackets but counts the words in your headings, which adds a few seconds. Then read the script aloud once, and rewrite any line you trip over.

Keep the template in a Google Doc or a .md file to preserve headings

The headings keep the parts of the episode apart while you write, and a Google Doc and a .md file both keep them when you import the script. A .txt file doesn't, because it keeps every symbol as you typed it, so a # would stay on the screen.

  • Google Doc. Paste the template and delete the # signs. Then select each heading line, choose Format, then Paragraph styles, then Heading 1 for the episode title or Heading 2 for the parts, and click Apply 'Heading 1' or Apply 'Heading 2'. When you edit the Doc later, open the script in NinjaPrompter and tap Refresh from Google Docs. Nothing changes until you decide.
  • .md file. Save the template in any text editor under a name that ends in .md, and keep the # signs and the blank lines. NinjaPrompter imports each heading as a heading, without the symbols.

Headings are imported as headings, but they're turned off at first, so each one shows as an ordinary line, and you could read it aloud by mistake. Switch on Headers in Reading settings, and each heading shows a little larger and in its own color, yellow unless you pick another Text color below the switch, so you can tell a label from a line you say.

Read the template in NinjaPrompter

Tap Import Google Doc or Import file, check the preview, and tap Save. Tap Start, then Play, and set Scroll speed by ear while you say the script aloud, as set the scroll speed to your pace explains.

For an audio-only episode, put the phone on a stand at about eye level, near your microphone, so you keep facing the microphone while you read. You don't need teleprompter glass or mirrored text, because no camera has to see your eyes. If you also film the episode, DIY teleprompter for iPhone covers setting the phone up with a separate camera, with or without glass, and how to read a teleprompter naturally covers reading on camera.

  • Holds and pace tags need Performance mode. Showing the marks is free. Performance mode, which holds the pauses and changes the pace, is part of the 7-day trial and the subscription. It's off by default, you turn it on from the Delivery cues button in the prompter, and it works while the script scrolls on its own.
  • Sound cues are notes. A line such as [Music in, then under.] shows on the screen like any other note, and the app plays nothing.
  • It doesn't listen. NinjaPrompter doesn't use the microphone, so it doesn't follow your voice or record it, and you set the speed yourself.
  • The free plan keeps one active script. Saving an import makes it your active script and locks the one you have, and you can switch once a week. So import your finished episode script rather than the blank template. During the trial and with a subscription, nothing locks.