NinjaPrompter

How to write a teleprompter script

By , Founder ·

A script may read well on the page but sound stiff when you say it. To write a teleprompter script that sounds natural, it's best to decide first how much of it to write out, then draft it by speaking, shape it for the ear, and revise it by reading it aloud. Pause and pace marks go in last. These steps work in any teleprompter, and on paper too:

  • Decide how much to write: the speech verbatim, only the key parts, or just notes and bullet points.
  • Set a time budget that leaves room for pauses.
  • Draft by saying each point out loud, then type what you said.
  • Shape the script for listeners: lead with the main point, signpost where you can (tell listeners what's coming next), and repeat the key idea.
  • Read the draft aloud, time it, and rewrite wherever you stumble.
  • Mark the finished copy, then turn those marks into your prompter's marks.

This post helps you learn how to draft a script on a stylistic level. How to format a script for a teleprompter covers what the finished script looks like, from line breaks to notes to yourself. NinjaPrompter can hold the pauses and change the pace you mark in its Performance mode, and the last steps of this post explain how to prepare a script for it.

Decide how much of the script to write

How much you write depends on the occasion, and there are three options. You can write a full script with every word, a hybrid with only the key parts written word for word, or notes with a short phrase for each point.

  • A full script suits a speech where the exact words matter or where you might lose your words, such as a eulogy, a wedding toast, or a formal statement. It also suits anything you record: a video to camera, a voiceover, or a news-style read.
  • A hybrid suits a video call or a livestream, where you respond to people as you go. Write the opening, the facts and names that have to be exact, and the close or the ask. For the rest, write bullets and say each point in your own words.
  • Notes suit a talk you know well, such as a team update or a question-and-answer session, where you want to respond to the room.

For a talk in front of a live audience, you can read a full script or speak from notes. When reading a speech is a good choice and when notes work better help you choose, including the middle path many speakers take for the opening and the close.

Set a time budget that accounts for pauses

Before you write, it helps to work out how many words fit your time slot, minus the time your pauses take, because a script that fills the slot with words alone runs long once you pause. For example, at 150 words per minute you say 2.5 words a second, so a 3-minute slot fits about 450 words. If you plan eight longer pauses of one second and twelve short ones of half a second, they take 14 seconds, the time of 35 words, which leaves you with about 415 words to write.

The 150 words per minute in this example is a working figure until you measure your own pace with the speaking speed test. Pauses lower your words per minute explains the arithmetic, and how many words are in a speech gives the word count for a time slot. Once you have a draft, the speech length calculator times it at your pace, with the pause marks counted.

Draft by saying it out loud (then type what you said)

Ideally, you should say each point out loud before you write it down, and then type the words you used. Spoken sentences come out shorter and plainer than written ones, and they already sound like you. You can talk it through into a voice memo app and transcribe it, or simply say a sentence, type it, and say the next one.

Your first spoken draft will be quite loose, and that's fine, because you'll tighten it when you revise. Talking first forces you to pick the most natural words that fit your unique style, which is hard to achieve if you start by writing formally.

Structure the script for listeners (remember: they only hear your words once)

It's best to shape the script so a listener can follow it in one hearing.

  • Lead with the point. Say the main thing in the first sentence or two, then explain it, so the listener knows where you're going.
  • Signpost. Tell the listener what's coming ("Three changes this year.") and when you move on ("The second change is…"). Out loud, these phrases help people keep up.
  • Repeat the key idea, with variation. Say your main point near the start and again near the end, in different words, which brings back anyone who drifted in the middle.
  • Put the source before the claim, and the title before the name. Say "The city's report says the bridge needs repair", not "The bridge needs repair, the city's report says", and "Head Librarian Priya Shah", not "Priya Shah, the head librarian." Out loud, the listener needs to hear whose claim it is, and who the person is, before the rest of the sentence.
  • Round or cut numbers. Figures are hard to take in by ear, so round "2,960 members" to "nearly three thousand members", and cut any figure that doesn't change what the listener will do or think. Write numbers as you say them covers how to write the ones you keep.

Turn a memo or an article into a spoken script

To turn a written piece into a script, find its main point and say it first, cut what a listener doesn't need, and rewrite each remaining sentence the way you'd say it.

Here's a paragraph from a library memo, written for the page.

Following approval by the Budget Committee, the Central Library at 14 Harbor Street will be closed for renovation from March 3 to April 25. During this period, all lending services will be relocated to the Elm Road branch, with the exception of the local history archive, which will remain inaccessible for the duration of the work. The Elm Road parking lot has a capacity of 117 vehicles; patrons are therefore encouraged to make use of the number 12 bus, which operates at 20-minute intervals. The renovation will deliver new heating, step-free access and an expanded children's area, according to Priya Shah, Head Librarian.

And here's the same content, rewritten as a spoken script for a short video to library members.

The Central Library is closing for a renovation.
We close on March third, and we reopen in late April.

While we're closed, you can borrow and return books at the Elm Road branch.
There's one exception.
The local history archive stays closed the whole time.

Head Librarian Priya Shah says the work brings three things.
New heating.
Step-free access.
And a bigger children's area.

One tip if you're going to Elm Road.
The parking lot there is small.
Bus number twelve goes there every twenty minutes.

So, from March third until late April,
the library is at Elm Road.

Compared with the memo, the script changes six things.

  • The point comes first. The memo opens with who approved the closure, and the script opens with the closure.
  • Reference details are gone. The committee, the address, and the exact reopening date can stay in writing.
  • A number became something the listener can use. "A capacity of 117 vehicles" became "small".
  • The source moved to the front, with the title before the name.
  • Signposts announce what's coming: "one exception", "three things", "one tip".
  • The last line repeats the point in different words.

Revise by reading aloud, timing, and testing key lines

Usually, it's best to revise the script by ear, in short rounds: read it aloud, change what doesn't work, and read it aloud again. Each test below takes a few minutes, and you don't need all of them every time.

  • Read it aloud and rewrite what you stumble on. Wherever you trip, run out of breath, or hear a phrase you'd never say, rewrite the sentence rather than practicing it until it comes out smoothly.
  • Time the read and cut content to fit. Read the whole script aloud with a timer, pausing where you'd pause, and write the time at the top. If it's over your budget, cut a point or an example rather than speeding up, because a rushed read leaves no room for the pauses you planned.
  • Say each key line three ways. For your two or three most important lines, read each one three times: stressing a different word, at a different pace, and with the pause in a different place. Keep the version that says what you mean.
  • Move the key word toward the end. In each important sentence, find the one word the listener has to remember. If it's buried in the middle, move it toward the end of the sentence, where it stands out.
  • Record yourself and listen back. Record a read with a voice memo app, then listen once without looking at the script. You'll hear where you sound like you're reading, which is hard to notice while you speak.
  • Let someone else read it. Ask a friend to read it aloud to you, cold. Where they stumble or stress a word you didn't expect, the sentence is probably unclear.

Why phrasing and pause placement often matter more than speed

Where you break a sentence often impacts how well people understand you much more than how fast you read. In one small Czech study, three groups of 15 school pupils each heard a different reading of the same short text, then judged whether statements about it were true. A normal pace with sensible phrasing scored 86% correct answers, a noticeably faster pace with the same phrasing scored 79%, and a normal pace with the phrasing broken in odd places scored 55% (Vlčková-Mejvaldová, 2023). While a small-sample experiment with Czech pupils doesn't prove the same holds true for all audiences, it's a good reason to spend the bulk of your revision time on nailing the phrasing and figuring out the best places to pause.

Mark the copy in pencil, just like voice actors and newsreaders do

Once the words are final, it's best to print the script and mark it in pencil while you read it aloud, because you'll move marks as you rehearse. There's no standard system, so use marks that make sense to you. These four are a good place to start.

  • An underline under a word you want to stress.
  • A slash where you pause: one for a breath, two for a longer stop.
  • An arrow over a word for the direction of your voice, up or down, or along a line for a stretch you want to take faster or slower.
  • A short note in the margin for a change of tone, such as "warmer" or "serious".

How to use pauses in a speech explains where each kind of pause goes. Mark only what you'd otherwise get wrong. With too many marks, the script gets hard to read, and the marks stop standing out.

Turn your pencil marks into NinjaPrompter marks

When the paper copy reads well, add the matching marks to the script you'll import. NinjaPrompter acts on some of them and shows the rest.

  • Slashes become / and //, the short and the longer pause. If you'd rather mark a word than a slash, [beat] and [pause] do the same job.
  • Arrows for pace become [slower] and [faster], at the start of the line you want to change.
  • Underlines become bold or italic in a Google Doc or a .md file, because NinjaPrompter doesn't import underline. Imported bold and italic stay off until you switch them on in Reading settings.
  • Arrows for your voice and tone notes become notes in square brackets, such as [warmer]. No mark changes your intonation, and arrows show as plain text, but a note appears in the script as a reminder and doesn't affect timing.

The pause marks page lists every mark with how long it holds or how much it changes the pace, and what NinjaPrompter does with the marks covers when they act.

Here's the library script from above with its marks added.

The Central Library is closing for a renovation.
We close on March third, and we reopen in late April. //

While we're closed, you can borrow and return books at the Elm Road branch.
There's one exception. /
[slower] The local history archive stays closed the whole time. //

Head Librarian Priya Shah says the work brings three things. /
New heating.
Step-free access.
And a bigger children's area. //

One tip if you're going to Elm Road. /
The parking lot there is small.
Bus number twelve goes there every twenty minutes. //

[slower] So, from March third until late April,
the library is at Elm Road.

The // marks close each section, and each / follows a signpost. The [slower] tags slow the text for the archive closure and the dates, which the listener has to catch. The last line has no mark, because the scroll ends when that line reaches the reading guide.

The marks are plain text, so you can add them in a Google Doc, in a .txt or .md file, or in the app's script editor after you import. Then rehearse with the marks in, as rehearse with cue marks describes, and move any mark that lands in the wrong place.

Showing the marks is free. Holding at pauses and changing the pace need Performance mode, which is part of the 7-day trial and the subscription. The marks act only while the script scrolls on its own. NinjaPrompter doesn't use the microphone, so it doesn't follow your voice, and it doesn't record you.

What changes by setting

How much you write and how you phrase it change with the setting. Here's where I'd start for each.

Setting How much to write out Sentence style One key tip
Live talk in a room A full script or notes, as explained above Conversational, with signposts Know your opening and closing well enough to say them to the audience rather than read them
Wedding toast or eulogy Full script Personal and plain, with one or two short stories Mark the places where you might need a moment to collect yourself
Video to camera Full script Spoken to one viewer, as "you" Say what the video is about in your first lines, before you introduce yourself
Video call or livestream Hybrid: the opening, exact facts, and the ask word for word, bullets for the rest Short, plain sentences Mark where each section starts, so you can pick up again after a question
Voiceover with no face on screen Full script Sentences that follow the pictures Don't describe what the viewer can already see on screen
News-style read Full script The source before each claim, and the title before each name Put the key facts at the top, so the read still works if you have to cut it short

For full scripts ready to copy, from a creator intro to a news-style read, see the sample teleprompter scripts. For an episode you read aloud, the podcast script template for a teleprompter shows each part. When the script is written and you're ready to read it on camera, how to read a teleprompter naturally covers the setup and where to look.